Maintenance Technician ( 2nd and 3rd Shift Available)
Company: Graphic Packaging International, Inc.
Location: Pineville
Posted on: January 20, 2023
|
|
Job Description:
MAINTENANCE TECHNICIAN JOB SUMMARY: Maintain, repair, and
install all machinery in the plant. They understand and align
business operations and the Department as he/she executes their
role to exceed customer expectations and align with GPI business,
cultural, financial and operational objectives.ESSENTIAL JOB
FUNCTIONS INCLUDE THE FOLLOWING:WORK SCHEDULE:Employees are
required to work 8-hour (M-F) schedule including
weekends.Occasional overtime is required.PHYSICAL DEMANDS:The
physical demands described here are representative of those that
must be met by an employee to successfully perform the essential
functions of this job. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential
functions.While performing the duties of this job, the employee is
frequently required to make a pushing and pulling motion when
sawing with a hand saw unit; occasionally required to climb
ladders, scaffolding, stairs, poles, or inclined surfaces when
getting or putting away parts from stock room and when getting to
shop/plant; rarely required to work above ground when measuring
shaft/pulley on any upper level; frequently required to bend over
equipment when cutting parts, working on machinery, or dealing with
stock; frequently required to crouch and stoop when lifting
material from floor to table or when measuring equipment in plant
for repair; occasionally required to kneel when measuring equipment
for repair or parts; occasionally required to twist and reach when
installing and checking parts and equipment in machinery;
occasionally required to use eye, hand, and foot coordination when
grinding skiving wheels and when milling critical parts;
occasionally required to use hand coordination of both hands for
fine and gross manipulation, simple and firm grasping, and for
wrist rotation.The employee is continuously required to lift up to
10 pounds, frequently required to lift 10 to 50 pounds and
occasionally required to lift over 50 pounds. The employee is
frequently required to carry up to 25 pounds and occasionally
required to carry over 50 pounds.WORK ENVIRONMENT:The work
environment characteristics described here are representative of
those an employee encounters while performing the essential
functions of this job. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential
functions.While performing the duties of this job, the employee
regularly works near moving mechanical parts. The employee is
regularly exposed to dust, heat, vibrations, toxic conditions, and
potential work hazards. The noise level in the work environment is
usually loud. Personal Protective Equipment (hearing protection,
safety glasses, safety shoes, hairnet) is required. Other PPE may
be required for specific tasks,The above job description is not
designed to cover or contain a comprehensive listing of activities,
duties or responsibilities that are required of the employee. Other
duties, responsibilities and activities may change or be assigned
at any time with or without notice.Required SkillsPrimary
Responsibilities are, but not limited to the following:Preventative
maintenanceRepairing machineryMachining partsFabricating parts and
install if neededDesign machine partsAssemble partsUse of hand
toolsTroubleshooting (electrical, mechanical, pneumatic,
hydraulic)Make and read printsWork with outside contractors on our
equipmentBuilding and grounds keepingQUALIFICATION REQUIREMENTS:To
perform this job successfully, an individual must have excellent
attendance, be able to work independently and be able to perform
each essential duty satisfactorily. The requirements listed below
are representative of the knowledge, skill, and/or ability
required. Reasonable accommodations may be made to enable
individuals with disabilities to perform the essential
functions.MECHANICAL SKILLS:Ability to pass the pre-employment
Mechanical AssessmentLANGUAGE SKILLS:Ability to read and interpret
documents such as safety rules, operating and maintenance
instructions, and procedure manuals. Ability to write routine
reports and correspondence. Ability to speak effectively before
groups of customers or employees of organization.MATHEMATICAL
SKILLS:Ability to add, subtract, multiply, and divide in all units
of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and
interpret bar graphs.REASONING ABILITY:Ability to solve practical
problems and deal with a variety of concrete variables in
situations where only limited standardization exists. Ability to
interpret a variety of instructions furnished in written, oral,
diagram, or schedule form.
Required ExperienceEDUCATION and/or EXPERIENCE:High school diploma
or general education degree (GED); Industrial Maintenance degree or
Certifications, additional knowledge in maintenance
tradeCERTIFICATES, LICENSES, REGISTRATIONS:Industrial Maintenance
Training Company issued Fork Truck Operator's license.At Graphic
Packaging International (NYSE: GPK), we produce the box you may
have poured your child's cereal from this morning, the
microwaveable tray that heated your lunch, the paper cup that held
your coffee throughout the day, and the carrier of those bottles of
craft beer you may enjoy tonight! We're one of the largest
manufacturers of paperboard and paper-based packaging for some of
the world's most recognized brands of food, beverage, foodservice,
household, personal care and pet care products. Headquartered in
Atlanta, Georgia, we are a team of collaborative, innovative,
passionate individuals who are committed to providing consumer
packaging that makes a world of difference.With almost 18,000
employees working in more than 70 locations in North and South
America, Europe and the Pacific Rim, we strive to be an
environmentally responsible leader in our industry and in the
communities where we operate. We are committed to workplace
diversity and offer compensation and benefits programs that are
among the industry's best to reward the talented people who make
our company successful.If this sounds like something you would like
to be a part of, we'd love to hear from you. Learn more about us at
.Inspired Packaging. A World of Difference.Graphic Packaging is an
Equal Opportunity Employer. All candidates will be evaluated on the
basis of their qualifications for the job in question. We do not
base our employment decision on an employee's or applicant's race,
color, religion, age, gender or sex (including pregnancy), national
origin, ancestry, marital status, sexual orientation, gender
identity, genetic identity, genetic information, disability,
veteran/military status or any other basis prohibited by local,
state, or federal law. Click here to view the EEO is the Law
Poster.
Keywords: Graphic Packaging International, Inc., Rock Hill , Maintenance Technician ( 2nd and 3rd Shift Available), Professions , Pineville, South Carolina
Click
here to apply!
|